$164.00 - $169.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)
Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle. - Low-profile clamp reduces stress on lightweight rails - 2-bolt design securely holds the saddle in place and is easy to adjust - Offset: 25mm - Clamp Style: Standard Rails - Material: Carbon
The Cyrano R5 Seatpost is made using Ergal aluminum; a 7075-series aluminum, with a high strength-to-density ratio that has the highest level of stiffness. Ergal also has good fatigue resistance, particularly important in cockpit performance. The optimized cradle position and pivot balance ensures the same support and performance right through the widest range of seat tube and personal preference angles. Stainless steel bolts and thumb wheel adjustment combine security with easy micro adjust accuracy. The 25mm setback means direct positional replacement of most original fit seatposts. - Body Material: Aluminium-Ergal - Head Material: Aluminium-Ergal - Bolts: Stainless Steel - Diameter: 27.2; 31.6mm - Length: 330, 400mm - Setback: 25mm - Weight: 240g (330mm - 31.6mm)
$5.99 - $12.49
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
Pro performance post A seatpost should do one thing well — hold your seat. Our new carbon fiber Pro seatpost does that and more with a reliable 2-bolt design that lets you swap saddles with ease. Great for road or mountain use and available in a slew of diameters, lengths and offsets, this post gives you the setup versatility you've always wanted. - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - OCLV carbon fiber shaft - Forged 6061-T6 alloy head with OCLV carbon fiber top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
Seatposts can easily be mistaken for a simple alloy or carbon tube, but it’s an essential part of your equipment. The amount of flex in a seatpost determines the comfort of your ride. Pro Vibe seatposts have the right amount of stiffness to ensure maximum power transfer without losing comfort. Align all forces to work in favor of you—go for the PRO Vibe seatposts. - 3D forged AL-2014 - Innovative 1 bolt clamping system - Weight: From 234g
- Anodized silver clamp with an anodized and fluted grooved post - Length: 350mm - Material: Alloy - Setback: 25mm
- 3D Forged AL-6061-T6 One-piece construction - High-grade black steel hardware - 275g
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
Bontrager's Speed Concept Seatpost lets you get your fit dialed before your next triathlon or time trial. It's crafted from OCLV carbon and the one-bolt head provides simple adjustments. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics.
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Bontrager's Race XXX Lite Seatpost is made of OCLV carbon for a sweet ride and minimal weight. Carbon's unique vibration damping properties smooth the road and the trail so you can go longer and harder. And, this post boasts an easy-to-use, one-bolt, infinitely-adjustable clamp.
Bontrager's Speed Concept Seatpost lets you get your aero fit dialed. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics, and the clamp is compatible with both standard and oversize saddle rails. This seatpost is compatible with 2014 Trek Speed Concept 9 Series bikes.
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
The ideal seatpost is simple, light, and easy to use, right? Fizik's Cyrano 00 goes one step further and gives you a perfectly balanced position regardless of clamp tilt thanks to the rotational center. That means you find the most comfortable, effective riding position to propel you to the finish line. The Cyrano is made from high modulus uni-directional carbon for exceptional strength and low weight, not to mention a tough and light aluminum clamp. It's topped off with titanium bolts for just a little more strength, weight, and class you expect from Fizik.
$299.95 - $369.95
When designing the WCS Kite dropper, Tom looked at what makes existing droppers fail and why their lifespan was so short. He knew service was a main contributing factor in dropper's lives, and wanted to create a post that could be easily serviced should something happen. In doing so, he created a system that is deceptively simple and incredibly reliable. The 3-position Kite offers 30mm of initial drop - the optimal height for lowered center of gravity while still providing an efficient pedal stroke - and full drop for when getting low and behind the rear end is necessary. - Three travel stops (0, 30mm, full drop) - Weight: sub 500 grams (including remote & housing) - 31.6 diameter - Stealth cable routing - Compatible with a variety of brake lever and bar mount configurations including Shimano I-SPEC I / II & SRAM Matchmaker - New two-bolt Trail post clamp offers easy adjustment and will not slip - Easily serviceable - Watch service video
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Distinctive silver finish - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing
Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)
Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles
The Elite seatpost is a distilled design guaranteed to deliver reliable everyday performance for years to come. Perfect as a replacement or your next upgrade. With an alloy body and a 2-bolt micro adjust head, this seatpost is available in a slew of diameters, lengths, and offsets to get you the right position. Key features: - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - Constructed of 2014 alloy - Forged 6061-T6 alloy head, top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
- Chromoly construction - Classic BMX design - Material: Cro-Mo - Setback: 0mm
The RockShox Reverb 1x remote pairs the ergonomics of SRAM’s shifter design and low-lever-force hydraulic actuation to the internally routed Reverb Stealth B1 so riders can use their Reverb posts quicker, more easily and often, for better ride control on the trail. Reverb's 1x Remote’s Bleeding Edge fitting makes bleeding quick and simple, with an updated fluid path and bleed porting to make it easier to push fluid through the system, and a dedicated bleed adapter that plugs into the bleed port and seals the system to minimize air contamination and fluid loss - Adjustable return speed by turning the collar on the remote - MatchMaker X or discrete clamp options included - 2000mm hose length - Adjustment: Infinite - Remote Position: Left
Page 1 of 3 Next page