Filter By:

Road Frames

Pinarello DOGMA F10- 167 BLACK LAVA 53 FRAME SET
Frame set only. Dogma F10 has also inherited much from the BOLIDE, currently the fastest bike in the world, the current Hour Record holder with Sir Bradley Wiggins, time trial World Champion with Kiryenka and winner of Tour de France 2016 with Chris Froome. It retains the super-efficient Flatback™ profiles from the Dogma F8, but inherits a new design of the down tube from the BOLIDE TT which shields the water bottles from the airflow, while further increasing the lateral stiffness. Asymmetric frame Torayca® T1100 1K DreamCarbon Fork ONDA F10 with ForkFlap™ 1” 1/8 - 1” 1/2 Think2 System with E-Link™ Seatclamp TwinForce ICR™ - Internal cable routing Italian thread BB SOE™ System 3XAir™ two positions available for the second bottle Removable front derailleur hanger UCI® approved Weight: frame (size 53) 820gr
Frame set only. Pinarello Dogma F10 In brief, the Dogma F10 frame is 6.3% lighter and 7% stiffer than Dogma F8. But there's much more to a high performance frame than weight and stiffness. The in-depth aerodynamic analysis and the huge amount of data derived by the development of the Bolide HR and Bolide TT was used to improve aero performances of the new Dogma F10. Concave Downtube The down tube is one of the parts of the frame which has a significant influence on the aero performances. Because of its position, just behind the front wheel, and its dimensions (the more massive tube of the frame), it generates more that 15% of the overall drag of the frame. Therefore, intuitively, the reduction of its drag would improve also the overall drag. The final design of the down tube leads to extraordinary results: the drag of the tube itself was reduced and, and the same time, the bottles’ drag decreases. The local variation of the drag, in the area between down tube, seat tube and bottles was reduced of 12.6%. Fork Flap The presence of the QR lever generates a big slipstream behind the dropout, with the consequence of increasing the drag. Modifying the shape of the dropout’s area, adding material where the slipstream is high, we were able to reduce it, decreasing the overall drag. Even if a small modification, this leads to a drag reduction of the fork up to 10%, because of its importance (data derived by the analysis of Bolide TT fork). Tubing Design Cross sections and shape of tubes, as much as the material’s choice, are very important to ensure stiffness and lightness. At the same time, as discussed above, it has a deep influence on the aerodynamics. Therefore, the final design of tubes is the optimal compromise between an aero shape and a stiff shape. Think Asymmetric Now, developing Dogma F10, we further developed this asymmetry of the frame, moving tubes even more on the right side. This new design further improved the overall performances of the bike, especially in terms stiffness. Torayca T1100 1K Carbon On Dogma F10, the main material used is Torayca T1100 1K, which ensures the highest tensile strength in the world. This choice contributes to increase the impact strength, to prevent breakages. Integration E-Link: the junction of new Shimano DuraAce Di2 (EW-RS910) will be integrated into the down tube, and easily accessible for adjustment and recharge; Internal cable routing: housings and electronical cables pass internally through the frame, for better aerodynamics and aesthetics; Think2 technology: the frame is compatible both for mechanical or electronical groupsets; Internal battery: the battery is fixed inside the frame, for a better aerodynamics and aesthetics; Integrated seatclamp: the Twin Force seatclamp, integrated into the frame, ensures low aero drag and a strong clamping of the seatpost. Specs E-Link Fork Flap Concave down tube Carbon Torayca T1100 1K Asymmetric Frame Italian thread BB Tapered headset 1? 1/8 (upper) – 1? 1/2 (lower) Think2 technology Internal Cable Routing Battery inside Twin Force Closure 3 x Air Flat Back Profile 25 mm tires fitting 820 g for raw frame, size 53
Page 1 of 1