A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes
Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames
The PocketRocket stove's ultra compact size is perfect for outdoor adventures where weight is a factor. - Glove-friendly flame controls allow precise flame adjustment - Boils 1 liter of water in under 3.5 minutes - Windclip wind shield protects flame and boosts fuel efficiency - Does not include fuel canister
An adjustable, rear integrated kickstand that supports bikes of all sizes, from 24" to 29" wheels. Adjustable length fits more bikes Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. - Adjustable length fits bikes with 24-29-inch wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Will not interfere with pedaling - Super strong and stable platform will hold your bike upright even with gear on the rack
$29.95 - $44.99
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
The Cross Double XL clamps independent of the front derailleur and is the long reach version of our popular cross double chain catcher. The adjustable cross XL foot mounts to its own CNC sculpted lightweight clamp. - Material: 6061 T6 CNC machined Aluminum - Fitment: All frames with a round mounting area - Clamp Sizes: 31.8mm, 34.9mm - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Take better care of your cycling clothes with Assos' Active Wear Cleanser. Utilizing a mild, PH-neutral formula, this tech cleanser preserves delicate fabrics, enhances breathability, keeps colors sharp, and neutralizes odors to keep your high-performance garments performing at their best, so you can, too.
• Aluminum double kickstand • Includes top plate • Not adjustable • 26-inch bicycle compatible
Perfect for keeping cables and cords tucked away or for attaching to your bike frame whatever you deem attachable, these handy Problem Solvers Zip Ties come packed 100 per box. - 2.5 x 200mm - Heavy-duty nylon material - 100 count per box
$7.99 - $9.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection
A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
- Chainstay mount kickstand for oversized or suspension frames - Made of alloy - Adjustable with lockscrew - Fits bikes from 20-inch to 700C wheels
•Uses one 9v battery (not included) •Fits most handlebars
$14.99 - $21.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
Replacement SKS Rubber Straps for RacebladePro and S-Board
Show Surly pride and add some flare with these stickers. Slap one on your helmet, bike, or whatever you choose.
- Center mount - Made of alloy with steel split rod extension - Adjustable with lockscrew - Fits bikes from 24-inch to 700C wheels
This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.
• Disc brake adapter for NCS fenders • Makes NCS fenders better fit disc brake bikes
The Problem Solvers Sketchbook and Bench Reference Guide exists because writing things down is important. Sketch out new ideas, record findings, workarounds, geometries, spoke lengths, never-try-it-agains, or just to doodle during that boring meeting at work. - DIY Reference and/or User Manual - Engineer-ruled for oddball geometric sketching - Includes semi-useful tables and tools
This pair of Sunlite M5x20 bolts with 6mm spacers is perfect for when components and accessories interfere with each other and additional space is needed. - Makes room for derailleurs, fenders, racks and more - Size: M5 x 20mm w/6mm spacer
Surly Ogre frame decals in a couple colors. - 100% awesome - Dry transfer style - Includes headbadge
Goodbye, car. Hello, Range Boost! Range Boost seamlessly attaches a second 500Wh Bosch battery to the down tube on select Trek eBikes. Select Trek electric bikes can now be fitted with Range Boost, an option that can double your e-bike's range so you can ride longer, commute farther, and take on bigger adventures. Product details - Go farther without worrying if you'll have enough battery power to get there - One key will give you access to your main battery, Range Boost, and bike lock - The system automatically manages power between batteries, so you don't have to - Compatible with select e-bikes with Removable Integrated Battery (RIB) systems - Expert installation exclusively at your Trek retailer
It’s a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it’s the perfect accessory for the fashion conscious. - Customize Surly gear and clothing with Surly patches - Several different sizes and styles available - Dimensions: 3 x 2.3"
Know the exact weight of your parts with Park's Tabletop Digital Scale. This precise scale is accurate to 2 grams and weighs components up to 3,000 grams (that's more than 6 pounds for us 'mericans). It switches easily between grams and ounces and has a tare feature to exclude the weight of a container. (Not responsible for extreme gram counting.)
Keep dust and water out of your headset with this easily attached wrap around neoprene cover.
Set of 8 SKS stainless fender drawbolt/nuts
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across
$8.99 - $10.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
Page 1 of 4 Next page