Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

maintenance

Squirt Dry Lube (4-Ounce)
$14.95
Keep your drivetrain quiet while protecting your components with Squirt Dry Lube. This long-lasting wax and water-based lubricant is low maintenance and easy to apply: no degreasing is needed, just squirt it on and ride. Squirt is 100% biodegradable and doesn't contain harmful solvents. Plus, it works in all-conditions, wet or dry, for mountain and road.
Park Tool Mini Chain Brute Chain Tool
$19.99
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool CT-3.3 Chain Tool
$37.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
CamelBak Bike Tool Organizer Roll
$20.00
Be prepared for anything the trail throws at your bike. Stash your CO2 cartridges, patch kits, and more. Roll it up, tuck it away, and keep all of your bike tools handy with a bright, lightweight organizer roll. - 3 secure zip pockets - Open mesh for visibility - Compression - Easy-release buckle - Weight: 56g / 2 oz
Park Tool Gear Clean Brush
$4.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Master Link Pliers
$15.95
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Bontrager Assembly Lube
$8.99
For a thank you from the future you Quickly and easily apply this assembly lubricant to any fastener on your bike to help prevent corrosion and seizing. Your bike (and mechanic) will thank you because we all know that a little assembly lube now can save a lot of elbow grease down the road. Product details - The anti-corrosion and anti-seizing formula is compatible with thread lockers - Precise applicator tip makes it super easy to apply - Pleasing cinnamon scent - Apply directly to any threaded fastener on the bike, usually one drop is enough - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Keep out of reach of children and do not ingest
RockShox Air Can Service Kit
$10.00 - $24.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Reverb Stealth A2 200-Hour or 1-Year Service Kit
$79.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
RockShox Rear Shock Clamp Tips
$39.00
Tool Clamp Tips for use with the RockShox Rear Shock Clamp Tool. - For rear shock damper servicing - For use with the RockShox Rear Shock Clamp Tool - Compatible With: Super Deluxe A1-B2 (2017-2021), Thrushaft C1+ (2021+)
Finish Line Shop Quality Chain Cleaner Kit
$39.99
Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.
Wolf Tooth Components Master Link Combo Pliers
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
Park Tool Cassette Lockring Tool
$7.99
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
Wera 967/9 TX HF L-Key Torx Wrench Set
$58.34
High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm
Stan's NoTubes Core Remover Tool
$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
absoluteBLACK GRAPHENwax Hot Melt Chain Wax Lubricant
$34.99
World's first pliable hot melt chain wax formula with Graphene for use in crockpots is here. GRAPHENwax—Super pliable, non-crumble, quiet, clean and extremely easy to break-in formula. It exhibits excellent dirt protecting capabilities and durability while maintaining impressively low friction for a prolonged period of time in dry and mixed conditions. It's the easiest wax to break-in after chain cools down—simply hold your chain in one hand and run it between two fingers of your free hand (as per our video) and job done—no more solid sticks or backpedaling issues. Our wax doesn't crumble, chip or leave any marks thanks to our proprietary formula. It's everything you wished for in a hot melt wax. Perfect for Road, Triathlon, Gravel, Mtb and E-bike. Keeps your drivetrain spotless clean. Can be used along with GRAPHENlube. It's the most quiet hot melt wax you will ever use. Unlike other Hot Melt waxes, GRAPHENwax not only exhibits lowest friction, but also lasts longer and is much easier to use. Usually after dipping the chain in melted wax you need to wait until chain cools down and then painstakingly break every chain link so the chain can be flexible again, leaving crumbled mess behind and particles on the frame and crank. With GRAPHENwax, we have reinvented this process. After the chain cools down, you only need to run it between your fingers along its entire length, and the chain is broken-in leaving no pieces of wax behind. Our wax simply doesn't crumble during the chain movement, meaning you have more wax that protects the drivetrain for longer. It can also withstand those hot days where other wax lubricants simply melt off your chain. GRAPHENwax will not stain your fingers when handling the chain and it's the quietest wax coating you will use. It's your "dream come true" wax lubricant. GRAPHENwax and our World Tour winning GRAPHENlube go very well together. If you plan longer rides you can "top it up" with GRAPHENlube. Chain will not require re-cleaning. Why we don't use Tungsten Disulfide (WS2) nor Molybdenum Disulfide (MoS2) additives. While these substances can exhibit super-low friction, they do it only in vacuum or inert gas. In normal humid air they not only have high friction but also very short life because of the rapid oxidation process. Using these additives in chain lubricant, where water is often present, is simply pointless. We also don't use any oils or paraffin oils in the mixture because it adversely impacts the friction. - 340g / 12 oz . +/- 4%. Each box contains 4 "squares" - Wax is black, but on the chain looks transparent. Doesn't leave marks. - Hydrocarbon waxes containing special mix of high-purity graphene. It does not contain any harmful solvents.
Bontrager Grease
$9.99 - $21.99
This ultra-high-performance grease is ideal for use on bicycles. The low-friction formula resists water and contaminants without standing out on the bike Product details - Performance waterproof grease for bicycle bearings, seals, assembly, and more - The formula reduces friction while performing longer between service intervals - Superior water washout resistance stands up to power washing - Unscented and undyed - As with all grease, clean and remove old grease first to guarantee compatibility - Compatible with Loctite Threadlocker and all metals, plastics, and carbon fiber - Available in a wide range of sizes and dispensing methods - 3oz (85g) cartridge is most compatible with the Bontrager Grease Gun
Miles Wide Wet Seal
$11.99
Ever feel like your suspension is not performing the way it used to? Tired of your dropper post not rising like it’s supposed to? - Wet Seal helps breathe life back into your suspension and dropper posts! A couple drops around the seals of your fork, shock, or dropper is all you need to greatly reduce stiction and increase the feel and performance. - Just like lubing your chain, Wet Seal is an important maintenance item. By using Wet Seal, you are keeping your seals lubricated and protected from dirt and debris, thus greatly extending both the life of your seals and suspension. - Formulated with the help of “The Suspension Experts” in Asheville, NC, Wet Seal is safe to use with any fork, shock, or seat post and is a must for those who want to make sure their bike is performing at the top of it’s ability.
Park Tool Multi-Tool
$18.95 - $44.99
The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.
Jagwire Pro Hydraulic Brake Line Cutter
$54.99
Jagwire's Pro Hydraulic Brake Line Cutter is a shop-quality tool that makes it quick and easy to precisely and cleanly cut hydraulic brake lines. With this fine hand-held tool you can cut brake lines on the workbench and on your bike, too.
Park Tool FR-4 Freewheel Remover
$7.95
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Finish Line Pedal and Cleat Lubricant (5-Ounce Bottle)
$8.99
Clipless pedals require regular maintenance for optimum performance and longevity. Finish Line's Pedal and Cleat Lubricant sprays on to fully and evenly coat all frictional surfaces and is engineered to ensure you click in and out of your pedals quickly, easily and smoothly every time. It also helps prevent creaks and squeaks from the pedal/cleat interface. Plus, thanks to a 100% dry-to-the-touch (in seconds) micro-thin coating, there is no oily, greasy film. So, it's safe to walk around on floors in your cycling shoes. Finish Line's Cleat and Pedal Lubricant was designed in conjunction with the pedal experts at Speedplay.
Park Tool BBT-22 Bottom Bracket Tool
$18.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Park Tool Shop Cone Wrench
$8.95
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Crank Brothers Y12 Multi-Tool
$29.99
When you're on the road or trail, the Y12 is your guardian angel. A compact frame packed with 12 shop-quality tools will save you from any mishaps with just what you need, but nothing you don't. The Y12 includes: - storage container for personal items - patch kit - hex wrenches (#2, 2.5, 3, 4, 5, 6, 8) - screwdrivers (Phillips #2, flat #2) - Torx drivers (T-10 and T-25) Weight: 166g
Park Tool CG-2.4 Chain Gang Chain Cleaning System
$37.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
Problem Solvers Through-Axle Hub Adapters for Truing Stands
$39.95
The Problem Solvers Through-Axle adapters make it possible to easily fit front and rear wheels with through axles into truing stands for wheel truing and repair. These adapters fit into the common through-axle sizes and have o-rings so that they fit nicely and stay put as you work on the wheel and take it in and out of the stand. They're made of CNC-machined 6061 aluminum for quality and durability. - Front compatible with 9/15/20mm hubs - Rear: compatible with 10/12mm hubs
Tri-Flow Superior Lube
$6.72 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Bontrager Flat Pack
$54.99
A convenient all-in-one pack containing useful tire-change essentials. Flats happen. Make sure you're prepared with a Bontrager Flat Pack. Featuring the storage, inflation, and tire removal equipment you need to handle an emergency flat repair, this purchase also includes a coupon for a free Bontrager tube so you can get the right size for your bike and tires. Product details - Kit features everything you need to quickly fix a flat, including the seat pack - Includes Pro Small seat pack (non-QC) for quick and easy on-bike storage - Contents include: mini pump, three tire levers, and patch kit - Also includes coupon for a FREE Standard Bontrager Presta or Schrader inner tube
Crank Brothers m19
$33.99 - $35.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Page 1 of 4 Next page