Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Bontrager Transmitr Remote
$49.99
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Planet Bike BRT Strap Light
$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
Bontrager Quick Connect Light Brackets
$4.99
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Bontrager Flare Round Mounting Kit
$1.99
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Bontrager High Ion Light Mount for Blendr
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Tail Light Seat Pack Clip
$4.99
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
Light & Motion Vis 360 Spare Front Mount
$9.99
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Trek Speed Concept Seatpost Reflector/Flare Mount
$2.99
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Light & Motion Sport Head Strap
$39.99
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Paul Component Engineering Stem Cap Light Mount
$52.50
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Light & Motion Nip Bosch Bar Mount
$29.99
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights
Light & Motion Tuck Underseat Mount
$24.99
The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight
Sunlite Replacement Light Straps
$4.99
- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light
Portland Design Works Tail Light Bracket
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot
Topeak DP Mount
$22.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Light & Motion Vya Underseat Mount
$24.99
The ultimate mounting solution for the Vibe Pro Taillight. Securely mount Vibe to seat rails placing rear lighting at the highest part of the bike - optimum for visibility to motorists. Innovative design allows the Vibe to be adjusted in multiple angles for ideal placement. Additionally this mount solves common mounting issues when using an aero post, trunk bag, etc. Features - Higher mounting point increases rear visibility - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Optimized for the Vya Pro Taillight for a sleek mounting orientation. The standard Vya Taillight is compatible but may interfere with accessories such as a seat bag
Serfas E-Lume 250/500 Headlight Bracket Mount
$2.00
Bracket mount for Serfas 250/500 E-Lume headlights.
NiteRider Tail Light Strap Mount
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
Knog PWR Redcap + Helmet Mount
$29.95
An attachment to use when mounting your PWR Rider or PWR Commuter bike lights to your helmet. PWR Red Cap gives you a 12 lumen narrow rear light beam for day & night visibility. Use the Modemaker app to program your rear light. - Includes: - PWR Red Cap Rear Light - Helmet Mount (also works with GoPro mount) - Adaptor - Hex Keys
NiteRider Pro Series Angled Multi-Position Helmet Mount
$19.99
Helmet mount for all systems that use the slider mounting clip System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
NiteRider Taillight Seat Stay Mount
$4.99
Taillight Seat Stay Mount
Light & Motion Helmet Mount for Seca, Vega, and Stella
$12.99
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
NiteRider Lumina Helmet Mount
$14.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Topeak BarXtender
$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Serfas Universal Helmet Mount
$15.00
Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R
Bontrager Glo/Ember Replacement Strap
$3.99
Product details - Replacement mounting strap for Bontrager Glo and Ember lights - Silicone strap allows for quick installation and removal of light - Fits 22.2 – 31.8mm handlebars, seatposts, and much more
Light & Motion 7.4v 2-cell Li-ion Battery
$59.99
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
Knog PWR Helmet/GoPro Mount
$14.95
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
Minoura SGS-400-OS Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Light & Motion 11.1v 3-cell Li-ion Battery
$99.99
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
Page 1 of 4 Next page